Preparation Manual
Section 2: How to Prepare for the Exams
This section of the preparation manual provides information to help you prepare to take the TExES exams.
Learn What the Exam Covers
You may have heard that there are several different versions of the same exam. It's true. You may take one version of the exam and your friend may take a different version. Each exam has different questions covering the same subject area, but both versions of the exam measure the same skills and content knowledge.
You'll find specific information on the exam you're taking in the Overview and Exam Framework section of the preparation manual, which outlines the content areas that the exam measures and what percentage of the exam covers each area.
Begin by reviewing the preparation manual for your exam in its entirety, paying particular attention to the content specifications. The content specifications detail the knowledge and skills to be measured on the exam. The Educator Standards section of the prep manual lists the standards necessary for a teacher of that subject.
Once you have reviewed the preparation manual and the standards, you can create your own personalized study plan and schedule based on your individual needs and how much time you have before exam day. Be sure to also seek other resources to strengthen your content knowledge.
Keep in mind that study habits are individual. There are many different ways to successfully prepare for your exam. Some people study better on their own, while others prefer a group setting. You may have more energy early in the day, but another test taker may concentrate better in the evening. Use this guide to develop the approach that works best for you.
Assess How Well You Know the Content
Use your review of the competencies to focus your study time on those areas containing knowledge and skills with which you are less familiar. You should leave yourself time to review the content of all domains and competencies, both the familiar and the less familiar ones, but the focus of your preparation time and priority in your studying should be placed upon those areas about which you are least confident.
Think carefully about how well you know each area; research shows that test takers tend to overestimate their preparedness. People often glance at the specifications, or at the exam questions (with "a peek" at the answers at the same time), and think that they know the content of the exam. This is why some test takers assume they did well and then are surprised to find out they did not pass.
The exams are demanding enough to require serious review. The longer you've been away from the content the more preparation you will most likely need. If it has been longer than a few months since you've studied your content area, make a concerted effort to prepare. You have everything to gain and nothing to lose from such an approach.
Familiarize Yourself with the Different Types of Exam Questions
The TExES exams include several types of exam questions, which can be broken into two categories: selected response (multiple choice) and constructed response (for which you write or record a response of your own that is scored by trained raters based on scoring guidelines). You may be familiar with these question formats from taking other standardized tests. If not, familiarize yourself with them so you don't spend time during the exam figuring out how to answer them.
How to Approach Unfamiliar Question Formats
Some questions include introductory information such as a table, graph, or reading passage (often called a stimulus) that provides the information the question asks for. New formats for presenting information are developed from time to time. Exams may include audio and video stimulus materials, such as a movie clip or some kind of animation, instead of a map or reading passage.
Exams may also include interactive types of questions. These questions take advantage of technology to assess knowledge and skills that go beyond what can be assessed using standard single-selection selected-response questions. If you see a format you are not familiar with, read the directions carefully. The directions always give clear instructions on how you are expected to respond.
For most questions, you will respond by clicking an oval to choose a single answer choice from a list of options. Other questions may ask you to respond by:
- Selecting all that apply. In some questions, you will be asked to choose all the options that answer the question correctly.
- Typing in an entry box. You may be asked to enter a text or numeric answer. Some questions may have more than one place to enter a response.
- Clicking check boxes. You may be asked to click check boxes instead of an oval when more than one choice within a set of answers can be selected.
- Clicking parts of a graphic. In some questions, you will choose your answer by clicking on location(s) on a graphic such as a map or chart, as opposed to choosing from a list.
- Clicking on sentences. In questions with reading passages, you may be asked to choose your answer by clicking on a sentence or sentences within the reading passage.
- Dragging and dropping answer choices into "targets" on the screen. You may be asked to choose an answer from a list and drag it into the appropriate location in a table, paragraph of text, or graphic.
- Selecting options from a drop-down menu. This type of question will ask you to select the appropriate answer or answers by selecting options from a drop-down menu (e.g., to complete a sentence).
Remember that with every question, you will get clear instructions on how to respond.
Approaches to Answering Selected-Response Questions
The information below describes some selected-response question formats that you will typically see on TExES exams and suggests possible ways to approach thinking about and answering them. These approaches are intended to supplement and complement familiar test-taking strategies with which you may already be comfortable and that work for you. Fundamentally, the most important component in ensuring your success is familiarity with the content that is covered on the exam. This content has been carefully selected to align with the knowledge required to begin a career as a teacher in the state of Texas.
The questions on each exam are designed to assess your knowledge of the content described in the competencies of each exam. In most cases, you are expected to demonstrate more than just your ability to recall factual information. You may be asked to think critically about the information, to analyze it, to compare it with other knowledge you have, or to make a judgment about it.
Be sure to read the directions carefully to ensure that you know what is required for each exam question. Leave no questions unanswered. Your score will be determined by the number of questions you answer correctly.
Question Types
You may see the following types of selected-response questions on the exam:
- Single Questions
- Clustered Questions
Below you will find descriptions of these commonly used question formats, along with suggested approaches for responding to each type.
Single Questions
The single-question format presents a direct question or an incomplete statement. It can also include a reading passage, movie clip, graphic, table, or a combination of these.
Example
The following question is an example of the single-question format. It tests knowledge of Technology Education 6–12 Competency 010: The teacher demonstrates knowledge of types of manufacturing systems and of the organization, structure and management of manufacturing enterprises.
Which of the following is an important advantage of the total quality management (TQM) system in manufacturing?
- The decision process is made more efficient by its being centralized in a small group of individuals.
- Workers in all departments take responsibility for quality assurance issues and design changes.
- Quality control is monitored by specialists who are authorized to make managerial decisions.
- Every aspect of manufacturing and design is closely monitored by sensors and other recording equipment.
Suggested Approach
Read the question carefully and critically. Think about what it is asking and the situation it is describing. Eliminate any obviously wrong answers, select the correct answer choice and mark your answer.
This question requires knowledge of the use of total quality management (TQM) in manufacturing. TQM emphasizes continuous improvement in all areas of a company's operation by integrating systems, decentralizing decision making, and empowering employees at all levels of the company. Now look at the response options and consider which of them best describes one advantage of the total quality management system in manufacturing.
Option A suggests that one advantage of total quality management is centralized decision making. Total quality management, however, relies on decentralized decision making by encouraging the active participation of all employees at all levels to ensure quality control. Therefore, Option A is not an advantage of the total quality management system and is not the best response for this item.
Option B suggests that one advantage of total quality management is allowing employees in all departments to take responsibility for decisions about quality issues. Decentralized decision making and employee empowerment are important goals of the total quality management system because quality control problems can often be more effectively identified and corrected by nonmanagers who are most familiar with the production processes in their departments. Thus Option B would correctly identify one advantage of the total quality management system.
Option C suggests that one advantage of total quality management is the use of specialists who are authorized to make management decisions. This centralization of the decision-making process is contrary to the use of decentralized decision making and employee empowerment characteristic of total quality management systems. Therefore, Option C is not an advantage of the total quality management system and is not the best response for this item.
Option D suggests that one advantage of total quality management is the use of sensors and recording equipment to monitor quality. While such devices may be used to help ensure quality control, total quality management is primarily a system for encouraging the participation of all employees in ensuring quality at all levels of the operation. Therefore, Option D is not an advantage of the total quality management system and is not the best response for this item.
Of the alternatives offered, only allowing workers in all departments to take responsibility for quality assurance issues and design changes is an advantage of the total quality management system in manufacturing. Therefore, the correct response is Option B.
Clustered Questions
Clustered questions are made up of a stimulus and two or more questions relating to the stimulus. The stimulus material can be a reading passage, graphic, table, or any other information necessary to answer the questions that follow.
You can use several different approaches to respond to clustered questions. Some commonly used strategies are listed below.
| Strategy 1 | Skim the stimulus material to understand its purpose, its arrangement, and/or its content. Then read the questions and refer again to the stimulus material to obtain the specific information you need to answer the questions. |
|---|---|
| Strategy 2 | Read the questions before considering the stimulus material. The theory behind this strategy is that the content of the questions will help you identify the purpose of the stimulus material and locate the information you need to answer the questions. |
| Strategy 3 | Use a combination of both strategies. Apply the "read the stimulus first" strategy with shorter, more familiar stimuli and the "read the questions first" strategy with longer, more complex or less familiar stimuli. You can experiment with the sample questions in the preparation manuals and then use the strategy with which you are most comfortable when you take the actual exam. |
Whether you read the stimulus before or after you read the questions, you should read it carefully and critically. You may want to note its important points to help you answer the questions.
As you consider questions set in educational contexts, try to enter into the identified teacher's frame of mind and use that teacher's point of view to answer the questions that accompany the stimulus. Be sure to consider the questions only in terms of the information provided in the stimulus — not in terms of your own experiences or individuals you may have known.
Example
First read the stimulus (a diagram of the universal systems model).
Use the diagram below to answer the question that follows.
The diagram starts with input with an arrow pointing to the process box, which then points to the output. From output a downward arrow is pointing down in the direction of the feedback box, which has an upward arrow pointing back to the input.
Now you are prepared to address the question associated with this stimulus. This question measures the knowledge of Technology Education 6–12 Competency 002: The teacher understands the design process and its application in technology.
1. The diagram above best represents which of the following systems?
- An electric fan that has two speeds: high and low.
- A security camera that films video on a continuous loop.
- A windmill with a fantail that turns the rotor into the wind.
- An outdoor light with a timer that turns on and off at preset times.
Suggested Approach
Read the question carefully and critically. Think about what it is asking and the situation it is describing. Eliminate any obviously wrong answers, select the correct answer choice and mark your answer.
Consider carefully the diagram of the universal systems model presented in the stimulus. Then read the question that asks you to identify which of four systems is best represented by the model shown in the diagram. Now look at the response options.
Option A suggests that the model best represents an electric fan that has two speeds. An electric fan has input (e.g., electricity), process (e.g., the action of the motor to rotate the blades of the fan) and output (e.g., moving air), but lacks a feedback device (e.g., a thermostat). Therefore, Option A is not the best response to this question.
Option B suggests that the model best represents a security camera that films video on a continuous loop. Such a system has input (e.g., light), process (e.g., converting the light to images on the film), and output (e.g., images on the film), but lacks a feedback device (e.g., a motion sensor that turns the film on and off). Therefore, Option B is not the best response to this question.
Option C suggests that the model best represents a windmill with a fantail that turns the rotor into the wind. Such a windmill has input (e.g., wind), process (e.g., turning of the rotor by the wind), and output (e.g., electrical or mechanical energy). In addition, the fantail is a feedback device that adjusts input by turning the rotor into the wind when wind direction changes. Therefore, Option C correctly identifies a system that is represented by the model presented in the diagram.
Option D suggests that the model best represents an outdoor light with a timer that turns on and off at preset times. Such a light has input (e.g., electricity), process (e.g., the production of light from electricity), and output (e.g., light), but lacks a feedback device (e.g., a light sensor that turns the light on or off at dusk or dawn regardless of the time). The timer is not a feedback device because it adjusts input according to a predetermined period of time rather than to variations in environmental conditions. Therefore, Option D is not the best response to this question.
Of the four options offered, Option C identifies a system that is best represented by the model presented in the diagram. Consequently, Option C is the correct response.
Now read the stimulus of this item (a diagram and flowchart of the response of a robotic truck to light and sound).
Use the diagram and flowchart below to answer the question that follows.
The diagram starts with the truck drawn about an iinch away from the home garage, which has a light buld drawn above it. The flowchart has 6 levels and the order listed from top to bottom as follows: first start, second set motor to forward direction, third send power to motor, fourth do while light, which has an arrow labeled "YES" coming out of the right side pointing back up to "send power to motor", and a downward arrow labeled "NO" pointing to the fifth level which is "If sound". If sound has an arrow coming out of the right side of it labeled "YES" which points to a box labeled STOP, and a downward arrow labeled NO which points to the sixth level which is "Reverse direction of motor." Reverse direction of motor has an upward arrow coming out of the left side of it pointing back up to the third level which is "send power to motor."
2. The robotic truck in the diagram contains a sound sensor and a light sensor. The table on which the truck is placed is well lit by a light bulb. The garage, which has an opening through which the truck can enter, is dark inside. The operator of the robotic truck has a whistle that can be used to activate the truck's sound sensor. The truck begins in the position shown in the diagram. Which of the following should occur if the operator blows the whistle continuously?
- The truck will go forward, enter the garage, reverse direction, then run backwards indefinitely.
- The truck will go forward, enter the garage, then stop.
- The truck will go a short distance forward, then stop without reaching the garage.
- The truck will remain in its starting position without moving.
Suggested Approach
Read the question carefully and critically. Think about what it is asking and the situation it is describing. Eliminate any obviously wrong answers, select the correct answer choice and mark your answer.
Consider carefully the diagram and flowchart presented in the stimulus. Then read the question which asks you to correctly identify how the truck will act if the operator blows the whistle continuously. Now look at the response options.
Option A suggests that the truck will go forward, enter the garage, reverse direction, then run backwards indefinitely. According to the flowchart, the truck motor will first be set to the forward direction and power will be sent to the motor. This will cause the truck to move forward and enter the garage. Since the garage is dark, power is no longer sent to the motor. According to the flow chart, the truck will only reverse direction if there is no sound. Since the whistle is blowing continuously, the truck will not reverse direction. Therefore, response A is incorrect.
Option B suggests that the truck will go forward, enter the garage, and then stop. As in response A, the truck motor will first be set to the forward direction, power will be sent to the motor, and the truck will move forward and enter the garage. Since the garage is dark, power will no longer be sent to the motor. According to the flowchart, the truck will stop with the whistle blowing continuously. Therefore, response B correctly describes the action of the truck according to the diagram and flowchart, with the whistle blowing continuously.
Option C suggests that the truck will go a short distance forward, then stop without reaching the garage. As in response A, the truck motor will first be set to the forward direction and power will be sent to the motor. According to the flowchart, the truck will continue to move forward until it is dark. Since it is not dark until the truck enters the garage, the truck will not stop before it enters the garage. Therefore, response C is incorrect.
Option D suggests that the truck will remain in its starting position without moving. According to the flowchart, however, power will be sent to the motor and the truck will move forward if there is light. Since there is light outside the garage, the truck will move forward until it is in the garage. Therefore, response D is incorrect.
Of the four options offered, Option B best describes the action of the truck according to the diagram and flowchart, with the whistle blowing continuously. Therefore, the correct response is Option B.
Gather Study Materials
For all content areas, think about where you might be able to obtain materials for review:
- Did you have a course in which the area was covered?
- Do you still have your book or your notes?
- Does your college library have a good introductory college-level text in this area?
- Does your local library have a high school-level text?
Do you know a teacher or professor who can help you organize your study? Would a study group suit you and help you maintain momentum? People have different study methods that work for them — use whatever you know that works for you.
Preparation manuals are available for all Texas educator certification program exams. Each prep manual provides a combination of exam preparation and practice, including sample questions and answers with explanations. You can also find informational tutorials and some interactive practice exams.
Plan and Organize Your Time
You can begin to plan and organize your time while you are still collecting materials. Allow yourself plenty of review time to avoid cramming new material at the end. Here are a few tips:
- Choose a testing date far enough in the future to leave you plenty of preparation time. For exam date information, refer to the exam's information page on the Texas Educator Certification Examination Program website.
- Work backward from the exam date to figure out how much time you will need for review.
- Set a realistic schedule — and stick to it.
Develop Your Study Plan
A study plan provides a roadmap to prepare for the exams. It can help you understand what skills and knowledge are covered on the exam and where to focus your attention. A study plan worksheet is available on the Texas Educator Certification Examination Program website. You can use this worksheet to:
- Define Content Areas: List the most important content areas for your exam as defined in the preparation manual.
- Determine Strengths and Weaknesses: Identify where you have thorough understanding and where you need additional study in each content area.
- Identify Resources: Identify the books, courses, and other resources you plan to use to study for each content area.
- Study: Create and commit to a schedule that provides for regular study periods.
Practice
Exams with constructed-response questions assess your ability to explain material effectively. As a teacher, you'll need to be able to explain concepts and processes to students in a clear, understandable way. What are the major concepts you will be required to teach? Can you explain them in your own words accurately, completely, and clearly? Practice explaining these concepts to test your ability to effectively explain what you know.
Using Study Materials as Part of a Study Group
People who have a lot of studying to do sometimes find it helpful to form a study group with others who are working toward the same goal. Study groups give members opportunities to ask questions and get detailed answers. In a group, some members usually have a better understanding of certain topics, while others in the group may be better at other topics. As members take turns explaining concepts to each other, everyone builds self-confidence.
If the group encounters a question that none of the members can answer well, the group can go to a teacher or other expert and get answers efficiently. Because study groups schedule regular meetings, members study in a more disciplined fashion. They also gain emotional support. The group should be large enough so that various people can contribute various kinds of knowledge, but small enough so that it stays focused. Often, three to six members is a good size.
Here are some ways to use the preparation manual as part of a study group:
- Plan the group's study program. Parts of the study plan template can help to structure your group's study program. By filling out the first five columns and sharing the worksheets, everyone will learn more about your group's mix of abilities and about the resources, such as textbooks, that members can share with the group. In the sixth column ("Dates planned for study of content"), you can create an overall schedule for your group's study program.
- Plan individual group sessions. At the end of each session, the group should decide what specific topics will be covered at the next meeting and who will present each topic. Use the content domains and competencies in the preparation manual to select topics, and then select practice questions.
- Prepare your presentation for the group. When it's your turn to present, prepare something that is more than a lecture. Write two or three original questions to pose to the group. Practicing writing actual questions can help you better understand the topics covered on the exam as well as the types of questions you will encounter on the exam. It will also give other members of the group extra practice at answering questions.
- Take a practice exam together. The idea of a practice exam is to simulate an actual administration of the exam, so scheduling an exam session with the group will add to the realism and may also help boost everyone's confidence. Remember, if you take a practice exam, allow only the time that will be allotted for that exam on your administration day. You can use the questions in the preparation manual for your practice exam. Interactive practice exams are available for some fields.
- Learn from the results of the practice exam. Check each other's answers. Answers for the selected-response questions with explanations for the answers are included
in the prep manual. If your exam includes constructed-response questions, look at
the constructed-response sample questions, which contain sample responses to those
types of questions and shows how they were scored. Then try to follow the same guidelines
that the test raters use.
- Be as critical as you can. You're not doing your study partner a favor by letting him or her get away with an answer that does not cover all parts of the question adequately.
- Be specific. Write comments that are as detailed as the comments about the sample responses. Indicate where and how your study partner is doing an inadequate job of answering the question. Writing notes for your study partner may also help.
- Be supportive. Include comments that point out what your study partner got right and that therefore earned points.
Then plan one or more study sessions based on aspects of the questions on which group members did not perform well. For example, each group member might be responsible for rewriting one paragraph of a response in which someone else did an inadequate job.
Whether you decide to study alone or with a group, remember that the best way to prepare is to have an organized plan. The plan you follow should set goals based on specific topics and skills that you need to learn, and it should commit you to a realistic set of deadlines for meeting these goals. Then you need to discipline yourself to stick with your plan and accomplish your goals on schedule.
Smart Tips for Success
Learn from the experts. Take advantage of these answers to questions you may have and practical tips to help you navigate the exam and make the best use of your time.
Should I guess?
Yes. Your score is based on the number of questions you answer correctly, with no penalty or subtraction for an incorrect answer. When you don't know the answer to a question, try to eliminate any obviously wrong answers and then guess at the correct one. Try to pace yourself so that you have enough time to carefully consider every question.
Are there trick questions on the exam?
No. There are no hidden meanings or trick wording. All of the questions on the exam ask about subject matter knowledge in a straightforward manner.
Are there answer patterns on the exam?
No. You might have heard this myth: The answers on selected-response exams follow patterns. Another myth is that there will never be more than two questions with the same lettered answer following each other. Neither myth is true. Select the answer you think is correct based on your knowledge of the subject.
Can I write on the erasable sheet(s) I am given?
Yes. You can work out problems or make notes to yourself on the erasable sheet(s) provided to you by the test administrator. You may use your notes in any way that is useful to you, but be sure to enter your final answers on the computer. No credit is given for anything written on the erasable sheet(s).
Tips for Taking the Exam
- Skip the questions you find extremely difficult. Rather than trying to answer these on your first pass through the exam, leave them blank and mark them. Pay attention to the time as you answer the rest of the questions on the exam, and try to finish with 10 or 15 minutes remaining so that you can go back over the questions you left blank. Even if you don't know the answer the second time you read the questions, see if you can narrow down the possible answers and then guess.
- Keep track of the time. Keep an eye on the timer, and be aware of how much time you have left to complete your exam. You will probably have plenty of time to answer all of the questions, but if you find yourself becoming stuck on one question, you might decide to move on and return to that question later.
- Read all of the possible answers before selecting one. Then, reread the question to be sure the answer you have selected really answers the question. Remember, a question that contains a phrase such as "Which of the following does NOT ..." is asking for the one answer that is NOT a correct statement or conclusion.
- Check your answers. If you have extra time left over at the end of the exam, look over each question and make sure that you have answered it as you intended. Many test takers make careless mistakes that they could have corrected if they had checked their answers.
- Don't worry about your score when you are taking the exam. No one is expected to answer all of the questions correctly. Your score on this exam is not analogous to your score on other similar-looking (but in fact very different!) exams. It doesn't matter on the exams whether you score very high or barely pass. If you meet the minimum passing scores along with any other requirements for obtaining teaching certification, you will receive a license. In other words, what matters is meeting the minimum passing score.
- Use your energy to take the exam, not to get angry at it. Getting angry at the exam only increases stress and decreases the likelihood that you will do your best. Highly qualified educators and exam development professionals, all with backgrounds in teaching and educational leadership, worked diligently to make the exam a fair and valid measure of your knowledge and skills. The best thing to do is concentrate on answering the questions.
Do Your Best on Exam Day
You followed your study plan. You are ready for the exam. Now it's time to prepare for exam day.
Plan to end your review a day or two before the actual exam date so you avoid cramming. Take a dry run to the test center so you're sure of the route, traffic conditions, and parking. Most of all, you want to eliminate any unexpected factors that could distract you from your ultimate goal — passing the exam!
On the day of the exam, you should:
- Be well-rested.
- Bring two pieces of original (no photocopies or digital ID) and valid (unexpired) identification, printed in English in the name in which you registered. Your identification must contain your name, a recent recognizable photograph, and your signature. For more information, refer to the ID Policy page on the Texas Educator Certification Examination Program website.
- Arrive at least 30 minutes before the scheduled reporting time.
- Eat before you take the exam to keep your energy level up.
- Wear comfortable clothes and dress in layers.
You cannot control the testing situation, but you can control yourself. Stay calm. The supervisors are well trained and make every effort to provide uniform testing conditions. You can think of preparing for this exam as training for an athletic event. Once you have trained, prepared, and rested, give it your best effort...and good luck!
Are You Ready?
Review this list to determine if you're ready to take your exam.
- Do you know the Texas testing requirements for your teaching field?
- Have you followed all of the exam registration procedures?
- Do you know the topics that will be covered in each exam you plan to take?
- Have you reviewed any textbooks, class notes, and course readings that relate to the topics covered?
- Do you know how long the exam will take and the number of questions it contains?
- Have you considered how you will pace your work?
- Are you familiar with the types of questions that you may encounter during your exam?
- Are you familiar with the recommended test-taking strategies?
- Have you practiced by working through the practice questions in the preparation manual?
- If constructed-response questions are part of your exam, do you understand the scoring criteria for these items?
- If you are repeating an exam, have you analyzed your previous score report to determine areas where additional study and exam preparation could be useful?
If you answered "yes" to the questions above, your preparation has paid off. Now take the exam, do your best, pass it — and begin your teaching career!
Return to Navigation